切肉機適合于規劃大的餐飲或肉類加工工廠,底座有輪,靈敏移動,刀具采納外置懸掛式規劃,洗拆便利,清潔更有保證。下面來講講切肉機操作流程以及操作注意事項吧。
The meat cutter is suitable for planning large catering or meat processing plants. The base has wheels and is sensitive to movement. The cutter adopts the external hanging patent planning, which makes it convenient to wash and disassemble, and the cleaning is more guaranteed. Let's talk about the operation process and precautions of the meat cutter.
大型切肉機操作流程大肉去骨頭,并且改刀成進品條狀或塊狀,插好電源,裝好刀片,啟動機器,注切刀片應向內旋轉,把肉塊放進去后耐心等待,把切好的肉片拿走或裝盤。后關閉切肉機并進行清洗,處理。
The operation process of the large meat cutter is to remove the bones from the meat, and change the knife to the incoming strip or block. Plug in the power supply, install the blade, start the machine, note that the cutting blade should rotate inward, put the meat into it, wait patiently, and take away the cut meat or put it on the plate. Then shut down the meat cutter and clean it, sterilize it.
切肉機的清洗要看您切肉機的材質,如果您的是不銹鋼材質的切肉機,您可以用水進行洗滌就可以了,清洗前拆開切肉的刀片一面早上刮傷。清洗完之后吹干在進行使用這樣才能更好的保證清理到位。
The cleaning of the meat cutting machine depends on the material of your meat cutting machine. If your meat cutting machine is made of stainless steel, you can wash it with water. Before cleaning, remove the blade of the meat cutting machine and scratch it in the morning. After cleaning, blow dry and use it, so as to better ensure the cleaning in place.
大型切肉機操作注意事項1.機器應放置在平穩的地方,帶輪的機器需把腳輪鎖死。
Precautions for the operation of large meat cutting machine 1. the machine should be placed in a stable place, and the casters of the machine with wheels should be locked.
2.確認好機器的入料口無異物卡住,請按照標牌上的電源指示來接好電源和地線。
2. Confirm that there is no foreign matter stuck at the feeding port of the machine. Please connect the power supply and ground wire according to the power supply instructions on the label.
3.機器運作時,請勿把手申請機器內。
3. When the machine is in operation, do not apply your hand into the machine.
4.機器使用完畢后,請務必把電源切斷,才能對機器進行拆洗。
4. After using the machine, be sure to cut off the power supply before disassembling and washing the machine.
5.電路部分不能清洗,拆洗時候請注意刀具等鋒利部件。
5. The circuit part cannot be cleaned. Please pay attention to sharp parts such as knives when disassembling and washing.
此外使用切肉片機前,切肉片肉絲機請先用溫水清洗干凈,不要弄濕電機。使用切片機時,先開動電機,看刀片轉向是否正確。切肉機如果逆轉應馬上糾正。用完后,先關掉切肉機電源,將可拆除部分拆下,用熱水洗干凈,然后裝上。更多相關注意事項就來我們網站
http://suoniao.com.cn了解吧!
In addition, before using the meat slicer, please clean the meat slicer with warm water first, and do not wet the motor. When using the slicer, first start the motor to see whether the blade rotation is correct. If the meat cutter reverses, it should be corrected immediately. After use, first turn off the power supply of the meat cutter, remove the removable part, wash it with hot water, and then install it. Come to our website for more relevant precautions http://suoniao.com.cn Understand!