就讓
大型切肉機廠家介紹下切肉機的的清洗維護步驟吧!
Let the large-scale meat cutter manufacturers introduce the cleaning and maintenance steps of meat cutter!
切肉機的正確清洗步驟:
Correct cleaning steps of meat cutter:
1、在切肉機使用結(jié)束之后,一定要馬上清洗機器。
1. Be sure to clean the meat cutter immediately after use.
2、切肉機在安裝和拆卸的時候要避免使用硬物鑿、打、敲、錘;一定要小心輕拿輕放。
2. When the meat cutter is installed and disassembled, it is necessary to avoid using hard chisels, hammers, hammers, and handle it with care.
3、在機器的刀片清洗干凈放回原處的時候一定要注意我們所擺放的位置,并且在機器開機之前一定要在機器的刀片上涂上一層食用油,同時在機器的所有傳動部分也要涂上一層潤滑油。
3. When the blade of the machine is cleaned and put back to its original place, we must pay attention to the position where we put it, and before the machine starts, we must apply a layer of edible oil on the blade of the machine, and at the same time, we must also apply a layer of lubricating oil on all transmission parts of the machine.
4、機器上所有軸承每半年都要拆洗一次。
4. All bearings on the machine should be disassembled and cleaned once every six months.
5、部分配件每三個月要拆洗一次。
5. Some parts should be removed and washed every three months.
6、電機間的齒輪和鏈條半年要加黃油一次。
6. The gear and chain between Motors should be buttered once every half a year.
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: large meat cutter manufacturers http://suoniao.com.cn .